Kia Sorento: Propeller Shaft Components

Propeller Shaft Assembly

...

Propeller Shaft Removal and Installation

1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...

See also:

Ignition Coil Installation
1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...