Kia Sorento: Seat Belt Buckle Switch (BS) Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will be deactivated.

Side Impact Sensor (SIS) Installation

Front Side Impact Sensor    • Do not turn the ignition switch ON and do not connect ...

Seat Belt Buckle Switch (BS) Components

...

See also:

Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...

Sound settings
Press the key Select [Sound] through TUNE knob or key Select menu through TUNE knob   Sound Settings This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader ...

Fuel Sender Installation
1. Install in the reverse order of removal. ...