Kia Sorento: Side Airbag (SAB) Module Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
|
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the front seat assembly. (Refer to the Body group- Seat)
|
| 3. |
Remove the seat back assembly. (Refer to the Body group- Seat)
|
Side Airbag (SAB) Module Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
See also:
Air Ventilation Seat Inspection
1.
Attach the positive (+) lead from the battery to terminal 1 and
the negative (-) lead to terminal 3.
Check that the fan motor operates.
...
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Seat Belt Buckle Switch (BS) Description
The SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front passenger
seat belt buckle status input. The se ...
Copyright В© www.ksmanual.com 2014-2024