Kia Sorento: Brake System

Emergency Fastening Device (EFD) Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Specifications

Item Specification Master cylinder • Type • I.D. mm(in) ...

See also:

Inspection (With GDS)
1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...

Seat warmer (if equipped)
The seat warmer is provided to warm the front seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm the driver's seat or the front passeng ...

Antenna Coil Installation
1. Install the coil antenna and connect the 6P connector. 2. Install the steering column upper and lower shrouds. ...