Kia Sorento: Brake Booster Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Brake Booster Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the air cleaner assembly.
G 2.4 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 3.3 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
| 3. |
Remove the master cylinder.
(Refer to Brake system - "Master cylinder")
|
| 4. |
Disconnect the vacuum hose (A) from the brake booster.
|
| 5. |
Remove the snap pin (A) and clevis pin (B).
|
| 6. |
Remove the mounting nuts (A).
|
| 7. |
Remove the brake booster (A).
|
Brake Booster Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Brake Booster Inspection
1.
Inspect the check valve in the vacuum hose, intensifier and the
connecting section.
...
See also:
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols indicate
the part to apply such materials during service.
Symbol
Meaning
Do ...
Component Location
1. Driver power window main switch
2. Passenger window switch
3. Front window motor
4. Rear window motor
5. Rear window switch
...
Copyright © www.ksmanual.com 2014-2024