Kia Sorento: Brake Pedal Adjustment - Brake System - Brake System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Brake Pedal Adjustment

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Brake System / Brake System / Brake Pedal Adjustment

Brake Pedal Height and Free Play
1.
Disconnect the stop lamp switch connector (A) and loosen the stop lamp switch lock nut.

2.
Adjust the brake pedal height (A) as illustration below.

Pedal height : 271 mm (10.67 in)

3.
Adjust the stop lamp switch clearance (B) and brake pedal free play.

Stop lamp clearance: 1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Pedal free play: 3.0 ~ 8.0 mm (0.12 ~ 0.31 in)

  
Adjust the brake pedal free play using the stop lamp switch lock nut.
4.
Connect the stop lamp switch connector.
Brake Pedal Installation
1. Pre-tighten the bracket fixing bolt (A) in dash panel. 2. Install the brake booster and brake pedal member fixing nuts (A) secur ...

Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

See also:

Components
1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8. Timin ...

Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes re ...

4WD ECU Description
4WD ECU processes signals from various sensors and determines the current road and driving conditions. The ECU then utilizes this information to implement precision control over the 4WD coupl ...

Copyright © www.ksmanual.com 2014-2025