Kia Sorento: Front Wheel Speed Sensor Removal - ESC(Electronic Stability Control) System - Brake System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Front Wheel Speed Sensor Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Removal

1.
Remove the front wheel and tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.
Remove the front wheel guard .
4.
Remove the front wheel speed sensor cable mounting bolt (A).

5.
Disconnect the front wheel speed sensor connector (B) and then remove the front wheel speed sensor.

6.
Installation is the reverse of removal.
Front Wheel Speed Sensor Components
1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

See also:

Yaw-rate and G Sensor Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Rear Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer p ...

Alternator Components
1. Overrun Alternator Pully (OAP) 2. Front bracket 3. Front bearing 4. Rotor 5. Rear bearing 6. Rear bracket 7. Through bolt 8. Regulator assembly 9. Regulator b ...

Copyright В© www.ksmanual.com 2014-2024