1. |
After loosening the tailgate hinge (A) mounting bolt, adjust the
tailgate by moving it up or down, or right or left.
|
2. |
Adjust the tailgate height by turning the tailgate overslam bumpers
(B).
|
3. |
After loosening the tailgate striker (C) mounting bolts, adjust
the tailgate striker by moving it up or down, or right or left.
|
Components
1. Steering column shaft
2. ECU
3. Motor
4. Steering gear box
...
Rear Bumper Replacement
•
Pry the trim off using a plastic trim tool and apply protective
tape around the rela ...
Power Tailgate Latch Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer ...