Kia Sorento: Anti-Pinch Strip Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Anti-Pinch Strip Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Anti-Pinch Strip Installation

1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) battery terminal.
Anti-Pinch Strip Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (R ...

PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate& ...

See also:

Circuit Diagram
...

Defroster
CAUTION To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ✽ NOTIC ...

Spark Plug Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Copyright В© www.ksmanual.com 2014-2024