1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the cargo lamp lens (A) with a flat-tip screwdriver.
|
3. |
Remove the cargo lamp bulb (A).
|
4. |
Remove the cargo lamp assembly (A) after disconnecting the connector.
|
Seat warmer (if equipped)
The seat warmer is provided to warm the front seats during cold weather.
With the ignition switch in the ON position, push either of the switches to warm
the driver's seat or the front passeng ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition ...