Kia Sorento: Components Location
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Components Location
| 1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band |
8. Fuel tank pressure sensor (FTPS) 9. Canister close valve (CCV) 10. Fuel level sender (FLS) 11. Fuel filler hose 12. Ventilation tube 13. Vapor tube 14. Fuel pump locking ring |
| [High Pressure Fuel Line] |
| 1. High Pressure Fuel Pump 2. High Pressure Fuel Pipe |
3. Delivery Pipe 4. Injector |
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be injury caused by
leakage of the high pressure fuel. So don’t do any repair work right
after engine stops.
|
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
...
See also:
A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high
pressure line into voltage value after measuring it. By converted voltage value,
engine ECU controls the cooling fan by o ...
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window.
The driver has a power window lock button which ...
Delivery Pipe Installation
•
Install the component with the specified torques.
...
Copyright © www.ksmanual.com 2014-2025