1. |
Installation is the reverse of removal.
|
2. |
Compress the piston into the caliper body using the SST (09581-11000).
|
3. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
Start/Stop Button Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
...
Input/Output Specification
Connector Pin Lay Out
IMS input/output pin information
No
Signal Name
I/O
Contents
Remark
A1
-
-
-
...
Components
1. Blind Spot Detection (BSD) Unit
2. BSD switch
3. Speaker (Built in the cluster)
4. BSD warning lamp (Built in the outside mirror)
...