Kia Sorento: Fuel Line Installation

Fuel Line Removal

1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to the F ...

Filler-Neck Assembly Removal

1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation tube quick-connector ...

See also:

AC Inverter Switch Removal
   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

Inspection (With GDS)
1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...