Kia Sorento: Hazard Lamp Switch Installation
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch Installation
| 1. |
Install the heater control unit to the center fascia panel.
|
| 2. |
Install the center fascia panel.
|
Hazard Lamp Switch Removal
•
Put on gloves to protect your hands.
...
Hazard Lamp Switch Inspection
Diagnosis With GDS
1.
It will be able to diagnose defects of IPM with GDS quickly. GDS
can operates actuator forcefully, input/output value monitoring and
self dia ...
See also:
Muffler Removal and Installation
1.
Remove the front muffler (A) after loosening the mounting nuts.
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...
Rear Blower Resister Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Copyright В© www.ksmanual.com 2014-2025