Kia Sorento: Heated Steering wheel Inpection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Steering System / Steering wheel / Heated Steering wheel Inpection

1.

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)

B.	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%

2.

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

B.	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

C.	At that time switch on, all measure point (1~8)

Heated Steering wheel System Circuit Diagram

Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Flex Steering Components Location

1. Flex steering switch ...

See also:

Roof Antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the power cable (A). ...

Installation
1. Install the multifunction switch. 2. Install the clock spring and steering wheel. 3. Install the steering co ...

Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windshield could ca ...

Categories

Copyright © www.ksmanual.com 2014-2024