1. |
Remove the negative (-) battery terminal.
|
2. |
Remove the front seat assembly.
(Refer to Body - "Front Seat")
|
3. |
Remove the IMS module (B) after disconnecting the connector (A)
and loosening the screws (3EA).
|
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
Tail Gate Replacement
Tailgate Trim Replacement
1.
Using a screwdriver or remover, remove the upper trim (B).
2.
After loosening the mounting screws, then remove ...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...