1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...
Brake Line Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder rese ...
Curtain Airbag (CAB) Module Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the roof trim. (Refer to the ...