Kia Sorento: Installation
| 1. |
Install the horns after connecting the horn connectors.
|
| 2. |
Install the head lamp.
(Refer to "Lighting system")
|
Removal
1.
Remove the head lamp.
(Refer to "Lighting system")
2.
Remove the bolts and disconnect the horn connectors, then remove
...
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground
the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspec ...
See also:
Rear Upper Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear upper arm or damage and deformation.
3.
...
Troubleshooting
Problem
Possible cause
Solution
Not pairing
Bluetooth device of Car is not discoverable mode
Enter Bluetooth pairing (searching) mode
Userв ...
Blind Spot Detection Switch Inspection
1.
Disconnect the BSD switch connector.
2.
Operate the BSD switch, then check for continuity between terminals
of BSD switch connec ...
Copyright В© www.ksmanual.com 2014-2024