1. |
Disconnect the negative (-) battery terminal.
|
2. |
Open the sunglass case cover from the overhead console then remove
the 2 screws holding the overhead console. Disconnect the switch connector
(6P) and Map lamp connector (6P), and then remove the overhead console
lamp (A).
|
3. |
Check for continuity between the terminals. If the continuity
is not as specified, replace the sunroof switch.
|
Multimedia Jack Installation
1.
Install the Multimedia jack.
2.
Install the console upper cover.
...
Passenger Airbag (PAB) Module Components
...
Compressor Components
1. Center Bolt
2. Hub Bolt
3. Hub Assembly
4. Snap Ring
5. Pulley
6. Compressor Assembly
7. Electric Control Valve
...