Kia Optima Manuals

Kia Sorento: Rear Seat Belt Replacement - Seat Belt - Body (Interior and Exterior) - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Rear Seat Belt Replacement

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body (Interior and Exterior) / Seat Belt / Rear Seat Belt Replacement

Second Row Seat Belt Replacement
  
•
When installing the belt, make sure not to damaged the retractor.
1.
Remove the second row seat assembly.
2.
Remove the third row seat assembly.
3.
Remove the rear door scuff trim.
4.
Remove the luggage box trim (A).
5.
Remove the luggage box partition trim (A).
6.
After loosening the mounting screws, then remove the rear transverse trim (A).
7.
After loosening the mounting bolt, then remove the second row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

8.
After loosening the mounting bolt, then remove the third row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

9.
After loosening the mounting screws, then remove the luggage side trim (A).
10.
After loosening the mounting bolt, then remove the C pillar trim (A).
11.
After loosening the mounting bolt, then remove the second row seat belt upper anchor (A).
12.
After loosening the mounting bolt, then remove the second row seat belt retractor (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

13.
Install in the reverse order of removal.
  
•
Replace ant damaged clips.
Second Row Center Seat Belt Retractor Replacement
1.
Remove the second row seat back cover [LH].
2.
Loosen the second row center seat belt lower anchor mounting bolt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

3.
After loosening the mounting nut (B), then remove the second row center seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
Second Row Seat Belt Buckle Assembly
  
•
Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B).
1.
Place the second row seat assembly [LH] to the rear and second row seat assembly [RH] to the front.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Seperate the second row seat belt buckle and second row seat assembly [LH] by removing the mounting bolt (C).
(LH)
1.
Remove the second row seat assembly [LH].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
After loosening the mounting bolt (A), then remove the second row seat belt buckle [LH] (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(Center)
1.
Remove the second row seat assembly [RH].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
After loosening the mounting nuts, then remove the second row center seat belt buckle rail (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
(RH)
1.
Remove the second row seat assembly [RH].
(Refer to Rear Seat - "Rear Seat Assembly")
2.
After loosening the mounting screw, then remove the rear seat shield inner cover (A).
3.
After loosening the mounting bolt (A), then remove the second row seat belt buckle [RH] (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
Third Row Seat Belt Retractor Replacement
1.
Remove the second row seat assembly.
2.
Remove the third row seat assembly.
3.
Remove the rear door scuff trim.
4.
Remove the luggage box trim (A).
5.
Remove the luggage box partition trim (A).
6.
After loosening the mounting screws, then remove the rear transverse trim (A).
7.
After loosening the mounting bolt, then remove the second row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

8.
After loosening the mounting bolt, then remove the third row seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

9.
After loosening the mounting screws, then remove the luggage side trim (A).
10.
After loosening the mounting bolt, then remove the rear pillar trim (A).
11.
After loosening the mounting bolt, then remove the third row seat belt upper anchor (A).
12.
After loosening the mounting bolt, then remove the webbing guide (B).
13.
After loosening the mounting bolt, then remove the third row seat belt retractor (C).
Tightening torque :
39.2~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

14.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
Third Row Seat Belt Buckle Replacement
1.
Remove the third row seat assembly.
2.
After loosening the mounting bolt, then remove the third row seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 Kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
Front Seat Belt Replacement
Front Seat Belt Replacement    • When installing the belt, make sure not to damaged the ...

Body Electrical System
...

See also:

Fuel Pump Installation
1. Install in the reverse order of removal.    Be careful of fuel pump direc ...

Exterior overview
1. Hood 2. Head lamp 3. Fog lamp 4. Wheel and tire 5. Outside rearview mirror 6. Panorama sunroof 7. Front windshield wiper blades 8. Windows 9. Door locks 10. Fuel filler lid 11. Rear c ...

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.45~1.9) 0.0571~0.0748 Output voltage (V ...

Categories


Copyright © www.ksmanual.com 2014-2025