1. |
Remove the front door trim.
(Refer to Body - "Front door")
|
2. |
Remove the front speaker (A) after removing the mounting screws.
|
1. |
Remove the rear door trim.
(Refer to Body - "Rear door")
|
2. |
Remove the rear speaker (A) after removing the mounting screws.
|
1. |
Remove the center fascia panel (A).
|
2. |
Remove the crash pad center speaker grill (A).
|
3. |
Remove the crash pad center speaker (A) after loosening the mounting
screws (2EA).
|
1. |
Remove the front door delta cover (A).
(Refer to Body - "Front door")
|
2. |
Remove the tweeter speaker (A) after disconnecting the connector.
|
1. |
Remove the left luggage side trim.
(Refer to Body - "Interior trim")
|
2. |
Remove the woofer speaker connector (A).
|
3. |
Remove the woofer speaker (A) after removing 4 nuts.
|
1. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
2. |
Remove the rear pillar trim.
(Refer to Body - "Interior trim")
|
3. |
Remove the surround speaker (A) after removing 2 nuts.
|
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Horn (Low pitch)
4. Horn (High pitch)
5. Clock spring
...
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gently ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...