Kia Sorento: Specification
| Item |
Specification |
| Ultrasonic sensor |
Voltage rating |
DC 12 V |
| Detecting range |
30 cm ~ 120 cm |
| Operation voltage |
DC 9 ~ 16 V |
| Operation current |
MAX 300 mA |
| Operation temperature |
-30°C ~ +80°C (-22°C ~ +176°C) |
| Operation frequency |
48 ± 5 KHz |
| Number of sensors |
4 (Left side, Left center, Right center, Right side) |
Component Location
1. IPM (Intelligent intergrated Platfrom Moduel)
2. Ultrasonic sensor
...
See also:
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Water Temperature Control Assembly Removal
1.
Disconnect the battery negative terminal.
2.
Loosen the drain plug and drain the engine coolant.
3.
Remove ...
TJ Joint Removal
•
Special grease must be applied to the driveshaft joint.
Do not substitute with anoth ...
Copyright © www.ksmanual.com 2014-2024