Kia Sorento: Specification
| Accelerator Position |
Output Voltage (V) |
|
| APS1 |
APS2 |
|
| C.T |
0.7 ~ 0.8 |
0.275 ~ 0.475 |
| W.O.T |
3.8 ~ 4.4 |
1.75 ~ 2.35 |
Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine ...
Circuit Diagram
...
See also:
Specifications
Direct control VFS[OD/C]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current value(mA)
...
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Interior Trim Replacement
Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
...
Copyright В© www.ksmanual.com 2014-2024