Kia Sorento: Specifications - Emission Control System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Emission Control System / Specifications

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.0 ~ 22.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure
[kPa (kgf/cm², in H2O)
Output Voltage (V)
-3.75 (-0.038, -15.05)
4.5
0
1.5
+1.25 (0.013, 5.02)
0.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.8 ~ 21.8 [20°C(68°F)]

Description
Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycl ...

Tightening Torques
Item kgf.m N.m lb-ft Positive Crankcase Ventilation (PCV) Valve installation 0.19 ~ 0.29 1.9 ~ 2.8 1.4 ~ 2.1 ...

See also:

Windshield Deicer Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to Body - "Crash pad") ...

Specification
Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 101.3 (1.03, 14.7) 4.0 ...

Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver while driving. It senses the rear side territory of the vehicle and provides information to the driver. ➀ BSD ...

Copyright © www.ksmanual.com 2014-2025