Kia Sorento: Specifications - Body (Interior and Exterior) - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body (Interior and Exterior) / Specifications

Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Tail Gate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)
2 point type

Body (Interior and Exterior)
...

Tightening Torque
Items N.m Kgf.m lb-ft Front and rear doors Door hinge to body 33.3~41.2 3.4~4.2 24.6~30.4 Door hinge to door 21 ...

See also:

Fuel Pressure Control Valve
Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine ...

Specification
HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) ...

Cooling Fan Components
1. Upper air guard 2. Cooling fan control module 3. Cooling fan shroud 4. Fan motor 5. Cooling fan ...

Copyright © www.ksmanual.com 2014-2025