Kia Sorento: Blind Spot Detection Unit Inspection
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Unit Inspection
| BSD Unit Alignment |
To sense the cars exactly in the next lane with the radar, the direction
of the sensor and the direction of the vehicle have to align.
This is BSD unit alignment. If this alignment is not performed as below
illustration, the degradation of detection performance and the cause of false
alarms.
The rear bumper accident vehicle and after replacing the BSD unit vehicle
have to do this align especially.
| 1. |
The rear bumper accident vehicle and after replacing the BSD unit
vehicle have to do BSD unit alignment using GDS.
|
| 2. |
Select the "BSD EOL coding" procedure.
|
| 3. |
Complete the alignment procedure according to GDS screen message.
|
Blind Spot Detection Unit Installation
1.
Install the BSD units to the rear bumper.
2.
Install the rear bumper.
3.
Connect the negative (-) battery te ...
See also:
Climate Control Air Filter Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
...
Specifications
Direct control VFS[35R/C]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current value(mA) ...
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...
Copyright В© www.ksmanual.com 2014-2025