Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain
1. |
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear,
cracks or damage. Replace if necessary.
|
2. |
Check a contact surface of the chain tensioner arm and guide for abnormal
wear, cracks or damage.
Replace if necessary.
|
3. |
Check the hydraulic tensioner for its piston stroke and ratchet operation.
Replace if necessary.
|
4. |
Check the timing chain for its elongation, abnormal wear or damage.
Replace if necessary.
|
Installation
•
Install the component with the specified torques.
•
...
IMS Power Seat Control Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure resistan ...