Kia Sorento: SS-A Solenoid Valve(ON/OFF)

SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.

SS-A Solenoid valve(ON/OFF) is installed at valve body.

Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Specifications

ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

See also:

Side Body C
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front side m ...

Propeller Shaft Removal and Installation
1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...

Blind Spot Detection Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") ...