Kia Sorento: Front Strut Assembly Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Inspection
| 1. |
Check the strut insulator for wear or damage.
|
| 2. |
Check rubber parts for damage or deterioration.
|
| 3. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
Disposal
| 1. |
Fully extend the piston rod.
|
| 2. |
Drill a hole on the A section to remove gas from the cylinder.
|
Front Strut Assembly Disassembly
1.
Remove the dust cover(A).
2.
Using the special tool (09546-26000), compress the coil spring
(A).
3.
...
Front Strut Assembly Reassembly
1.
Install the spring lower pad (D) so that the protrusions(A) fit
in the holes (C) in the spring lower seat (B).
2.
Compress coil ...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which would seal the fuel filler. After the
gasket on the fuel filler cap and the fi ...
Appearance care
Exterior care
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the labe ...
Copyright В© www.ksmanual.com 2014-2024