Kia Sorento: Smart key unit Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Smart key System / Smart key unit Inspection
Smart Key Unit
| - |
Refer to BE group - inspection / self diagnosis with scan tool.
|
Smart Key Switch
| - |
Refer to BE group - inspection / self diagnosis with scan tool.
|
Antenna
| - |
Refer to BE group - inspection / self diagnosis with scan tool.
|
Tailgate Switch
| 1. |
Check for continuity between the tailgate latch terminals.
|
| 2. |
If continuity is not specified, inspect the switch
|
Smart key unit Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing (A).
(Refer to Body - "Crash pa ...
Smart key unit Installation
Smart Key Unit
1.
Install the smart key unit.
2.
Install the smart key unit mounting bolt and nut, and then connect
the connector.
...
See also:
Input Speed Sensor Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed senso ...
Rear Bumper Components
1. Rear bumper cover
2. Rear bumper lower bracket [RH]
3. Rear bumper lower bracket [LH]
4. Rear bumper side bracket [RH]
5. Rear bumper side bracket [LH]
...
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Copyright В© www.ksmanual.com 2014-2024