1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
|
3. |
Remove IPM(Intelligent intergrated Platform Module) connector
(A), bolts and nut.
|
4. |
Remove IPM after removing rear connectors.
|
Input Speed Sensor Signal Waveform
...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 6 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
680 ± 100
D-range
...
Oil hydraulic Motor(Actuator) Installation
1.
Before installation, wipe the surface with a clean cloth.
2.
Check the O-rings (A) of the new hydraulic motor (actuators).
...