1. |
It will be able to diagnose defects of door lock with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
2. |
Select "Current data", if you will check current data of power
door lock system. It provides input/output status of IPM.
|
3. |
If you will check the power door lock operation forcefully, select
"Actuation test".
|
4. |
To check the DTC of the door lock, select "Diagnostic trouble
codes".
|
Fluid Service Adjustment Procedure
Oil level Check
A check of ATF level is not normally required during scheduled
services. If an oil leak is ...
Rear Wiper Motor Removal
1.
Detach the rear wiper cap (A).
2.
Remove the rear wiper arm & blade (A) after removing rear wiper
HEX nut (B).
...
Water Temperature Control Assembly Components
1. O-ring
2. Water temperature control assembly
3. Water inlet fitting
4. Engine coolant temperature sensor
5. Thermostat
6. Thermostat gasket
7. Oil cooler coolant ho ...