Kia Sorento: Power Door Lock Switch Installation
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Installation
Driver Power Window Main Switch
| 1. |
Install the driver power window switch assembly and connectors.
|
| 2. |
Install the front door trim.
|
Passenger Window Switch
| 1. |
Install the passenger power window switch assembly and connectors.
|
| 2. |
Install the front door trim.
|
Power Door Lock Switch Removal
Driver Power Window Main Switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "F ...
Power Door Lock Switch Diagnosis With GDS
1.
It will be able to diagnose defects of door lock with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
...
See also:
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pressing the fuel
filler lid opener button on the driver’s door. (if equipped)
✽ NOTICE
If the fuel filler lid does not open ...
Engine Room Under Cover Removal and Installation
1.
Unfasten the fasteners and bolts and then remove the engine room under
cover (A).
Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf ...
Schematic Diagrams
Circuit Diagram - ESC (1)
Circuit Diagram - ESC (2)
Circuit Diagram - ESC (3)
Circuit Diagram - ESC (4)
ESC connector input/output
Connector Terminal
Specifica ...
Copyright В© www.ksmanual.com 2014-2025