Kia Sorento: Power Tailgate Latch Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer to the Body - "Tailgate")
|
| 3. |
Remove the tail gate latch assembly (A) after loosening the mounting
bolts.
|
| 4. |
Loosen the PCU (Power Closing Unit) mounting nuts.
|
| 5. |
Disconnect the power tailgate latch connector (A) and PCU connector
(B).
|
| 6. |
Remove the power tailgate latch & PCU assembly (A).
|
Power Tailgate Unit Installation
1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) bat ...
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
See also:
Limp Home Function
1.
Limp Home By Tester
If the PCM(ECM) detects the fault of the SMARTRA or transponder,
the PCM(ECM) will allow limp home function of the immobilizer. Limp
hom ...
Circuit Diagram
...
SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.
...
Copyright В© www.ksmanual.com 2014-2024