Kia Sorento: Auto Light Switch Inspection

Operate the auto light switch, then check for continuity between terminals of multi-function switch connector.

Circuit Diagram

...

Auto Light Sensor Inspection

In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...

See also:

Inspection
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Rear Disc Brake Replacement
1. Remove the rear wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. ...

Front wheel alignment
   When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always ...