Kia Sorento: Auto Lighting Control System
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Auto Lighting Control System
- Specifications
- Component Location
- Circuit Diagram
- Auto Light Switch Inspection
- Auto Light Sensor Inspection
- Auto Light Sensor Removal
- Auto Light Sensor Installation
Troubleshooting
Symptom
Possible cause
Remedy
One lamp does not light
(all exterior)
Bulb burned out
Replace bulb
Socket, wiring or ground faulty
...
Specifications
Items
Specifications
Rated voltage
5V
Load
Max. 1mA
Detection illuminations
Tail lamp
ON : 2.7 В± 0.05 (V)
OFF : 4.3 ...
See also:
Front Wiper Motor Installation
1.
Install the wiper motor.
2.
Install the crank arm.
Torque :
12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf. ...
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...
Adjustment
Description
The friction material inside the coupling will degrade over time. Therefore,
corresponding compensation values must be referenced and entered after replacing
the cont ...
Copyright В© www.ksmanual.com 2014-2025