Kia Sorento: Immobilizer System

Auto Head lamp leveling Unit Inspection with GDS

Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

Circuit Diagram

...

See also:

Auto Defogging Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the cowl side trim. (Refer to Body - "Crash Pad") ...

Master Cylinder Installation
1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system - "Brake system B ...

Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset / relearned according to the following procedure. 1. Check DTC(s) and clear if exist. ...