Kia Optima Manuals

Kia Sorento: Cylinder Head Disassembly - Cylinder Head Assembly - Engine Mechanical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Cylinder Head Disassembly

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Disassembly

  
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
1.
Remove the MLAs (A).
2.
Remove the valves.
(1)
Using SST (09222-3K000, 09222-3K100), compress the valve spring and remove retainer lock.
(2)
Remove the spring retainer.
(3)
Remove the valve spring.
(4)
Remove the valve.
(5)
Using needle-nose pliers, remove the valve stem seal.
  
Do not reuse old valve stem seals.
Cylinder Head Removal
   • Use fender covers to avoid damaging painted surfaces. • ...

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds fo ...

See also:

Installation
   • Install the component with the specified torques. • ...

Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* fl ...

Auto Light Sensor Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...

Categories


Copyright © www.ksmanual.com 2014-2025