Kia Sorento: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the variable intake solenoid valve connector (A).
|
| 3. |
Disconnect the vacuum hoses (B,C) from the valve.
|
| 4. |
Remove the installation bolt (D), and then remove the valve from
the surge tank.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Installation
•
Install the component with the specified torques.
•
...
See also:
Troubleshooting
Vehicle inspection
SYMPTOM CHART
Symptom
Suspect Area
Remedy (See page)
Squeak or grunt-noise from the front suspension, occurs more
in cold ambient t ...
CVVT & Camshaft Removal
1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Set No.1 cylinder to TDC/comp ...
PTG Spindle Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim and Luggage side trim.
(Refer to the Body - "Tailgate& ...
Copyright © www.ksmanual.com 2014-2024