Kia Sorento: SS-B Solenoid Valve(ON/OFF)

SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.

SS-B Solenoid valve(ON/OFF) is installed at valve body.

Installation

1. Install in the reverse order of removal.    • ...

Specifications

ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

See also:

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

Rear Shock Absorber Installation
1. Installation is the reverse of removal.    After checking the distance 45 ...

Panorama Sunroof Switch Inspection
1. Disconnect the negative (-) battery terminal. 2. Open the sunglass case cover from the overhead console then remove the 2 screws holding ...