Kia Sorento: Warning Messages
Shift to "P" position (for smart key system and automatic transaxle)
- This warning message illuminates if you try to turn off the engine without
the shift lever in P (Park) position.
- At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop Button once more, it will turn to the ON position).
Low Key Battery (for smart key system)
This warning message illuminates if the battery of the smart key is discharged
when the Engine Start/Stop Button changes to the OFF position.
Press start button while turn steering (for smart key system)
- This warning message illuminates if the steering wheel does not unlock normally
when the Engine Start/Stop Button is pressed.
- It means that you should press the Engine Start/Stop Button while turning
the steering wheel right and left.
Press brake pedal to start engine (for smart key system and automatic transaxle)
- This warning message illuminates if the Engine Start/Stop Button changes
to the ACC position twice by pressing the button repeatedly without depressing
the brake pedal.
- It means that you should depress the brake pedal to start the engine.
Key not in vehicle (for smart key system)
- This warning message illuminates if the smart key is not in the vehicle
when you press the Engine Start/Stop Button.
- It means that you should always have the smart key with you.
Key not detected (for smart key system)
This warning message illuminates if the smart key is not detected when you press
the Engine Start/Stop Button.
Press start button again (for smart key system)
- This warning message illuminates if you can not operate the Engine Start/Stop
Button when there is a problem with the Engine Start/Stop Button system.
- It means that you could start the engine by pressing the Engine Start/ Stop
Button once more.
- If the warning illuminates each time you press the Engine Start/Stop Button,
have your vehicle inspected by an authorized Kia dealer.
Press start button with smart key (for smart key system)
- This warning message illuminates if you press the Engine Start/Stop Button
while the warning message “Key not detected” is illuminating.
- At this time, the immobilizer indicator light blinks.
Check fuse "BRAKE SWITCH" (for smart key system and automatic transaxle)
- This warning message illuminates if the brake switch fuse is disconnected.
- It means that you should replace the fuse with a new one. If that is not
possible, you can start the engine by pressing the Engine Start/Stop Button
for 10 seconds in the ACC position.
Shift to "P" or "N" to start engine (for smart key system
and automatic transaxle)
This warning message illuminates if you try to start the engine with the
shift lever not in the P (Park) or N (Neutral) position.
✽ NOTICE
You can start the engine with the shift lever in the N (Neutral) position.
But, for your safety, we recommend that you start the engine with the shift lever
in the P (Park) position.
Door Open
It means that any door is open.
Trunk Open
It means that the trunk is open.
Sunroof Open (if equipped)
The warning message illuminates if you turn off the engine and then open the
driver's door when the sunroof is open.
Align steering wheel (if equipped)
- This warning message illuminates if you start the engine when the steering
wheel is turned to more than 90 degrees to the left or right.
- It means that you should turn the steering wheel and make the angle of the
steering wheel be less than 30 degrees.
Low Washer Fluid (if equipped)
- This warning message illuminates on the service reminder mode if the washer
fluid level in the reservoir is nearly empty.
- It means that you should refill the washer fluid.
Turn on "FUSE SWITCH" (if equipped)
- This warning message illuminates if the fuse switch on the fuse box is
OFF.
- It means that you should turn the fuse switch on.
Description
On this mode, you can change setting of the doors, lamps, and so on.
Door
Auto Door Lock (if equipped)
• Off:
The auto door lock operation will be deactivated.
• Speed: ...
See also:
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applying the brakes during a test drive.
If the brakes do not ...
Blind Spot Detection Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
...
Battery Specification
Item
Specification
Model type
CMF68L-BCI
Capacity [20HR/5HR] (AH)
68 / 54
Cold Cranking Amperage (A)
600 (SAE) / 480 (EN)
...