Kia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel Disassembly
| 1. |
Remove the brake disc (B) from the knuckle assembly (A).
|
| 2. |
Remove the hub assembly mounting bolts (B) from the knuckle (A).
|
| 3. |
Remove the hub assembly (C) and the dust cover (B) from the knuckle
(A).
|
| 4. |
Reassembly in the reverse order of disassembly.
|
Front Hub / Knuckle / Tone Wheel Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Front Hub / Knuckle / Tone Wheel Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine ...
3. TCM Terminal input/ output signal
Connector [A]
Pin No.
Signal
Condition
Type
Level
29
Sports mode up switch
Up ON
Input
0V/Battery voltage level
...
Record your key number
The key code number is stamped on the bar code tag attached
to the key set. Should you lose your keys,
this number will enable an authorized Kia dealer to duplicate the keys easily.
Remove the ba ...
Copyright В© www.ksmanual.com 2014-2024