Kia Sorento: Steering Column and Shaft Inspection
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Steering System / Electric Power Steering / Steering Column and Shaft Inspection
| 1. |
Check the steering column for damage and deformation.
|
| 2. |
Check the joint bearing for damage and wear.
|
| 3. |
Check the tilt bracket for damage and cracks.
|
| 4. |
Check the key lock assembly for proper operation and replace it
if necessary.
|
Steering Column and Shaft Disassembly
Universal joint assembly
1.
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
Tightenin ...
Steering Gear box Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
See also:
Power Seat Control Switch Installation
1.
Install the power seat control switch after connecting the connector.
...
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Components
1. Intake camshaft
2. Exhaust camshaft
3. Intake CVVT assembly
4. Exhaust CVVT assembly
5. Timing chain
6. Timing chain guide
7. Timing chain tensioner arm
8. Timin ...
Copyright В© www.ksmanual.com 2014-2025