Kia Sorento: SRS Control Module (SRSCM) Components

SRS Control Module (SRSCM) Description

The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

SRS Control Module (SRSCM) Removal

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

See also:

Component Location
1. Hood switch 2. Burglar horn 3. IPM & RF receiver 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear door lock actuator ...

Drive Belt Removal and Installation
1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive be ...

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...