1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove box housing")
|
3. |
Remove the passenger airbag mounting nuts.
|
4. |
Disconnect the passenger airbag connector (A) and active vent
connector (B).
|
5. |
Remove the crash pad.
(Refer to Body - "Main crash pad assembly")
|
6. |
Remove the mounting bolts from the crash pad. Then remove the
passenger airbag.
|
Alternator Specification
Alternator
Item
Specification
Rated voltage
13.5V, 130A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator bui ...
Side Airbag (SAB) Module Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Dynamic Damper Installation
1.
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
...