1. |
Inspect the check valve in the vacuum hose, intensifier and the
connecting section.
|
2. |
Check the boot for damage.
|
IMS Power Seat Control Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Front Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
...
Photo Sensor Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lam ...