Kia Sorento: Component Location
| 1. Hood switch 2. Burglar horn 3. IPM & RF receiver 4. Key warning switch 5. Front door switch |
6. Front door lock actuator & switch 7. Rear door lock actuator & switch 8. Rear door switch 9. Tailgate lid switch |
| 1. Antenna 2. IPM connector |
3. Antenna bracket |
Specifications
Item
Specification
Rated voltage
DC 3V
Temperature range
-4°F ~ 140°F (-20°C ~ +60°C)
RF Modulation method
FSK
...
Description
Burglar Alarm State [B/A State]
B/A State
Description
DISARM
1.
In "DISARM" state, no vehicle start inhibition. So, whe ...
See also:
ESC Control Module Removal
1.
Turn the ignition switch OFF.
2.
Remove the surge tank. [G3.3 GDI]
(Refer to Engine Mechanical System - "Surge Tank")
...
Side Body C
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Front side m ...
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Copyright © www.ksmanual.com 2014-2025