1. |
Remove the steering wheel cover (B) after loosening the screw
(A-6ea).
|
2. |
Disconnect the streeing wheel remote control switch connector
(A).
|
3. |
Remove the remote control switch (A).
|
4. |
Install in the reverse order of removal.
|
Rear Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Rear Wiper Switch
Rear Washer Swi ...
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual de ...
Description
Burglar Alarm State [B/A State]
B/A State
Description
DISARM
1.
In "DISARM" state, no vehicle start inhibition. So, whe ...