Kia Sorento: Engine Electrical System

Muffler Removal and Installation

1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Specification

Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.62 ± 10％ [20°C (68°F)] Secondary Coil Re ...

See also:

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Parking Assist Sensor Installation
1. Install the rear ultra sensor after connecting the connector. 2. Install the rear bumper cover. 3. Connect t ...

Compressor Description
The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperatur ...