Kia Sorento: Power Door Mirror Switch Inspection
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Power Door Mirrors / Power Door Mirror Switch Inspection
| 1. |
Remove the front door trim and power door mirror switch module
(A).
(Refer to Body - "Front door")
|
| 2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
|
Power Door Mirror Switch Installation
Driver Door Mirror Switch
1.
Install the driver door module and connectors.
2.
Install the front door trim.
...
Power Door Mirror Actuator Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door module.
(Refer to Body - "Front door")
...
See also:
Heater & A/C Control Unit (DATC) Component
Connector Pin Function
Connector
Pin No
Function
Connector
Pin No
Function
A
1
Battery (+)
A
29
...
HID Head Lamp
1.
Bulb
(1)
Elements
Xenon gas: Xenon gas activates the initial reaction for
rapid illuminating.
Molybdenum ...
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
2.
...
Copyright В© www.ksmanual.com 2014-2025